Description

CONVENTIONAL PASSENGER CAR ENGINE OILPhillips 66® Shield Classic Motor Oil, SAE 20W-50 is a high-quality, conventional automotive engine oil recommended for use in gasoline-fueled passenger cars and light trucks operating under high-temperature conditions, such as towing heavy loads, where the vehicle manufacturer specifies an SAE 20W-50 engine oil. It also may be used in gasoline-fueled competition engines and high-performance street engines where SAE 20W-50 engine oil is preferred. It provides engine protection for both turbocharged gasoline direct injection and conventional gasoline-fueled and flex-fueled passenger cars and light trucks under all operating conditions. It is not recommended for use in new cars under warranty.Features BenefitsHelps protect against low speed pre-ignition (LSPI) in turbocharged gasoline direct injection engines (TGDI)Resists viscosity and thermal breakdown at high temperaturesProtects against sludge and varnish formationProtects against wearProtects against rust and bearing corrosionGood foam resistanceApplicationsTurbocharged gasoline direct injection and conventional gasoline-fueled light trucks and sport utility vehicles where a SAE 20W-50 engine oil is specifiedGasoline-fueled competition engines and high-performance street enginesLicenses Approvals:Shield Classic Motor Oil is licensed for:API service SP, SN PlusBackward serviceable for use where API SN or earlier ”S” category engine oils are recommended

@ (°C)(-15)

Additional Details:

Cold Cranking Viscosity, cP7,500

Color, ASTM D15003.5

cSt @ 100°C19.9

cSt @ 40°C181

Density, lbs/gal @ 60°F7.37

Flash Point (COC), °C (°F)230 (446)

High-Temp/High-Shear Viscosity, cP @ 150°C5.0

Phosphorus, wt %0.077

Pour Point, °C (°F)-30 (-22)

SAE Grade20W-50

Specific Gravity @ 60°F0.878

Sulfated Ash, ASTM D874, wt %0.8

Total Base Number (TBN), ASTM D28967.1

Viscosity Index127

Viscosity, Kinematic

Zinc, wt %0.086