Description

Designed to fit most vehicles with GM 8.2-inch, 8.5-inch 8.6-inch 10-bolt differentials. However, vehicles may have other interfering components that may require modifications or moving of existing brackets, require longer cover bolts or different cover bolts, clearance of sway bars, etc. – Checking for adequate clearance and fitment for your application should be verified prior to purchase installation. Refer to the ID guide and measurement drawings for specificationsLoad Bolts Provide Additional Support to Bearing CapsMagnetic Drain Plug for Easy ServicingA356.0-T6 Aluminum Construction.4-quart Additional Fluid CapacityMIL-Spec Black Anodized FinishOver 65 Years of B&M QualityLifetime Limited WarrantyMachined B&M LogoOur engineers designed the line of Hi-Tek differential covers to not only look good but address a number of weaknesses of the factory-stamped steel covers. First, they started by constructing the covers of thick A356.0-T6 aluminum, which dissipates heat much faster than the factory steel unit keeping the fluid temperature lower under high-stress loads vs. a steel cover. Then for added durability, we added a reinforced center bar for extra strength along with load bolts to help prevent bearing cap deflection under severe loads. The internal shape of the cover retains the smooth round back internally to help keep the fluid flow going over the ring gear to properly lubricate the bearings, the ring and pinion gears. Additional features include a magnetic drain plug for catching ferrous metal particles, MIL-Spec (MIL-A-8625) black anodized finish, machined B&M logo, and all necessary hardware and easy-to-follow detailed instructions for a quick and simple installation you can do at home.