Description

HIGH-QUALITY ANTI-WEAR HYDRAULIC OILPhillips 66® Megaflow AW Hydraulic Oil is a high-quality anti-wear hydraulic oil developed for use in a wide variety of industrial and mobile hydraulic system applications. It meets the performance requirements of all major hydraulic pump manufacturers, and is recommended for use in all types of high-pressure, high-speed hydraulic pumps.Features BenefitsExcellent wear protection for hydraulic pumps and motorsExcellent oxidation resistance and thermal stabilityProtects against rust and corrosionExcellent water-separating propertiesGood foam resistanceApplicationsHydraulic systems on industrial, mobile and marine equipmentPlastic injection molding presses (ISO 46)Elevators, hoists, presses and floor jacksMarine cargo winches and steering systemsMobile construction equipmentService station liftsAir tools and other pneumatic equipment lubricated through air line lubricatorsChain drivesElectric motor bearingsLightly to moderately loaded enclosed industrial gear drives that do not require a compounded or extreme-pressure (EP) gear oilMegaflow AW Hydraulic Oil meets the requirements of the following industry and OEM specifications:Husky Injection Molding Systems (approved, ISO 46)Kraus Maffei Hydraulic Oil (ISO 46)Bosch Rexroth RE 90220, Type HLPDIN 51524 Part 2, Anti-wear Hydraulic Oils, Type HLPParker Hannifin (Denison) HF-0, HF-1, HF-2 (approved ISO 32, 46, and 68)Eaton-Vickers I-286-S, M-2950-S, 35VQ25A anti-wear performance (brochure 03-401-2010 Rev 1 ISO 32, 46, and 68)Fives Cincinnati P-68 (ISO VG 32), P-70 (ISO VG 46), P-69 (ISO VG 68) (approved)German Steel Industry SEB 181222ISO 11158:1997, Family H (Hydraulic Systems), Type HMU.S. Steel 127

Acid Number, ASTM D974, mg KOH/g0.38

Color, ASTM D15000.5

Copper Corrosion, ASTM D1301a

cSt @ 100°C4.3

cSt @ 40°C22

Demulsibility, ASTM D1401, minutes to pass10

Density, lbs/gal @ 60°F7.12

Failure Load Stage—

Flash Point (COC), °C (°F)196 (385)

Foam Test, ASTM D892, Seq. I, mL0/0

FZG Scuffing Test, ASTM D5182

Oxidation Stability

Pour Point, °C (°F)-40 (-40)

Rust Test, ASTM D665 A&BPass

SO Grade22

Specific Gravity @ 60°F0.855

SUS @ 100°F106

SUS @ 210°F39.9

TOST, ASTM D943-04a, hours>5000

Viscosity

Viscosity Index101

Zinc, wt %0.043